Apply Blush & Care to the cheeks with the surgical steel applicator, and blend with your fingertip or the PR754 PROFESSIONAL BRUSH BLUSHER brush.

Blush & Care for Cheeks is a product from the Injection Of Beauty Re-Filler System.
Thanks to the components in the kit, it allows for the use of multiple colors with a single syringe, reducing plastic consumption and moving toward an increasingly eco-sustainable approach.

INJECTION OF BEAUTY RE-FILLER SYSTEM A revolutionary combination of innovation and sustainability. It consists of a SYRINGE with a special steel applicator, inside which the different RE-FILLER products are inserted, which can also be purchased individually, for reduced plastic consumption.

Thanks to the RE-FILLER SYSTEM it combines innovation and eco-sustainability, guaranteeing: 1) Filler effect on the skin 2) Perfect yield, enhanced by the steel applicator 3) Optimal dosage with the Syringe bottle 4) Lower environmental impact, thanks to the Re-Fillers that can be used in multiple shades with a single Syringe 5) Savings opportunities, by purchasing individual Re-Fillers. A real beauty system that is literally addictive as it allows you to customize the Syringe bottle using the different colors present in the Refiller.

FIRST TIME USE
1. Insert the desired RE-FILLER into the SYRINGE, without the white cap, aligning one of the two pins at the
base with the shorter, right edge of the “L”-shaped notch.
2. Push until you hear a click. The bottle is now ready for use, in the CLOSED position (see label below).
3. To OPEN, rotate the RE-FILLER towards the longer, left edge of the “L”-shaped notch, and press
slowly until a small amount of product comes out.
4. Apply it to the cheeks with the surgical steel applicator, and blend with your fingertip or with the PR754 PROFESSIONAL BRUSH BLUSHER.

SUBSEQUENT USES
Close BLUSH & CARE for cheeks after each use by turning the base of the RE-FILLER clockwise. To
open it again, turn it counterclockwise.
RE-FILLER REPLACEMENT
Remove the RE-FILLER from the SYRINGE in the CLOSED position and replace it with a new one, if finished, or one of a
different color, inserting it as indicated for the first use.